FAQs

What is soapstone and why is it fitted to some stoves?

Soapstone is a beautiful natural semi soft stone (it feels like soap hence the name) that has been used for centuries for decorating and engraving. It also has the natural ability to accumulate and retain heat, radiating it for many hours even after the original heat source has ceased. A stove surrounded or indeed built [...]

By |2017-07-18T13:54:33+01:00July 18th, 2017|0 Comments

How do you light a fire?

Each stove behaves differently however the following guidance applies to most stoves.  Before lighting the stove ensure that all air controls are fully open. Generally speaking it is a good idea to keep an insulating layer of ashes from earlier fires in the bottom of the stove Place two pieces of split wood in the [...]

By |2017-07-18T13:51:48+01:00July 18th, 2017|0 Comments

Does my stove need servicing?

Yes, all stoves must be serviced according to manufacturer’s instructions usually on an annual basis. Failure to undertake this may invalidate the manufacturer's guarantee.

By |2017-07-18T13:50:24+01:00July 18th, 2017|0 Comments

What wood should I burn?

The best wood to use is fully seasoned dry split logs. Burning dry wood is environmentally friendly and will also cost you less. Burning wet wood causes pollution burns inefficiently, puts tar on to your glass door and chimney and will degrade the performance of your stove and flue system. Driftwood contains salt that can [...]

By |2017-07-18T13:49:55+01:00July 18th, 2017|0 Comments

Why use a HETAS registered installer?

All installations of a domestic solid fuel, wood or biomass burning appliance need to be registered in England and Wales. There are two methods of doing this, using a registered HETAS installer or applying directly to the building control department in your area. It is recommended that you use a HETAS installer as the work [...]

By |2017-07-18T13:49:09+01:00July 18th, 2017|0 Comments

Why have a stove with a fitted boiler?

This option enables the heat generated in the stove to not only heat your room, but also contribute to heating your hot water and in some cases your central heating. This can increase the overall efficiency and reduce your fossil fuel costs for heating hot water. The amount of hot water gained is dependent on [...]

By |2017-07-18T13:48:27+01:00July 18th, 2017|0 Comments

What is the difference between a wood burner and a multi fuel stove?

A wood burning stove should only burn wood, preferably dry seasoned hardwood or compressed fire logs. Burning any other material will damage your wood burner and negate the manufacturer’s warranty. A multi-fuel stove can burn wood as well as smokeless coal. It is advised that you do not burn them together as it may damage [...]

By |2017-07-18T13:47:13+01:00July 18th, 2017|0 Comments

What size wood burner should I have?

A stove should not heat the room so much that it becomes unbearably hot, neither should it struggle to radiate sufficient heat on a cold day. Please use the following sum to work out your approximate requirements: [ room width (m) x room length (m) x room height (m) ] / 14 = kW output [...]

By |2017-07-18T13:46:16+01:00July 18th, 2017|Comments Off on What size wood burner should I have?
Go to Top